Description:

NanoColoro varnish with an antimicrobial effect is intended for the preventive protection of various surfaces from the spread of pathogenic organisms in crowded places (public buildings, trolleybuses, buses, subway cars and other vehicles, etc.), as well as various structural elements (handrails , seating areas, etc.). The varnish forms an almost invisible coating that does not change the color of the base on which it is applied. The varnish is suitable for painting: glass, abs plastic, hardboard, plexiglass, textiles, artificial leather, decorative plasters, previously painted substrates (paints and enamels based on binders PF, AK, NC, EP, PE, including powder coatings), concrete, brick and mineral plastered surfaces, as well as chipboard, fibreboard, and wallpaper.

• Kills 99.99% of known viruses and bacteria within 2 hours of exposure.
• Continuously destroys pathogens on the painted surface, with complete destruction occuring within 2 hours after exposure.
• Effective service life - at least 3 years.
• Provides a mildew resistant finish.
• Provides excellent strength and resistance to frequent washing with detergents.
• Has low odor and minimal VOC content.
• Recommended for painting rooms with large numbers of people.

Composition

Varnish, solvent, drier, targeted additives (including antimicrobial nanoparticles)

Usage Instructions:

Clean the new surface from dirt and dust, oil contaminants, degrease, previously painted with varnish or enamels - from the old coating that does not adhere firmly, it is recommended to sand the glossy surface to a matte state to improve adhesion, remove dust. It is recommended to pre-treat the new surface with an antiseptic primer. Application: brush, varnish roller, paint sprayer in 2-3 layers. When using a sprayer, dilute the varnish with spirit to a working viscosity. Lightly sand the surface with fine-grained sandpaper and remove dust.

Consumption per single layer coating 1 kg up to 16 m² depending on the application method, type and method of surface preparation.

Drying at a temperature of (20±2)оС: 8 hours, interlayer drying – 24 hours, until ready for use – 48 hours, full set of properties – 5 days.

Storage Conditions:

Transport and store the paint in a tightly closed container, away from heating devices, protecting from moisture and direct sunlight. Can be stored for up to 24 month prior to opening, from the date of manufacture.

Caution:

Keep away from children. Carry out work in a ventilated area. Use personal protective equipment for the respiratory system, eyes, and skin. Use rubber gloves to protect your hands. In case of contact with skin or eyes, rinse with water. After finishing work, ventilate the room for at least 24 hours. Fire and explosion proof.